The use of metal detector in the making of denture

下面我们通过金属检测仪的工作流程为大家展示金属的流程管控：

Under the work flow of metal detector, we show the process control of metal.

1， 供应商提供金属后需做进货检验，抽检不同批次的原材料检验，合格后才会进入仓库。

1, the supplier needs to do the inspection of the goods after the supply of metal. The inspection of the raw materials for different batches will be checked, and the warehouse will be entered after the supplier is qualified.

2， 领用金属后会订单编号逐一核对金属品名，并使用条形码管理每个批次的金属使用在不同的订单中

2, the metal name is checked by the order number one by one, and the bar code is used to manage each batch of metal in different orders.

3， 铸造完成后要再一次进行金属成分检测,以防成分不准,若此次检测过程中发现有成分不准或金属发错现象要立即返工.

3, after the completion of the casting, we must check the metal composition again, so as to prevent the components from being inaccurate. If the components are not allowed or the metal is wrong, we need to rework immediately.

4，铸造后清理出来的铸头（俗称钢头）统一收集，并做好标识进行报废处理。

4, the cast head (commonly known as steel head) after casting (commonly known as steel head) is collected, and the identification is done for scrap treatment.

5，受污染含少量镍的钴铬金属(必须报废,不允许流入生产线)。铸造完成的半成品金属内冠，经过金属检测仪检测出有污染情况的，也要进行隔离分装，标识报废处理

5, cobalt and chromium metal contaminated with a small amount of nickel (must be scrapped and not allowed to flow into the production line). The semi finished metal inner crown of the foundry has been detected bybaowenx.75ix.comshutong.71ix.com nuantong.71ix.com ruanguanc.75ix.cnjiaoguann.75ix.cn luoshuan.75ix.cn the metal detector, and the separation and distribution should be carried out, and the discarded treatment should be marked.

6，通过成份检测后还需要使用放大镜,放大倍数进行筑巢、缩孔的检验

6, it is necessary to use magnifying glass and magnification to test the nesting and shrinkage cavity through the detection of the composition.

7,   检查金属成份合格的半成品还需要高精密检测仪(显微镜)检查铸造的边缘适合性，边缘完成线的完整性。符合要求的才能进入下一站作业，不符合的仍作为报废品处理。

7, a high precision tester (microscope) is needed to check the semifinished semi-finished products of metal components. In accordance with the requirements, it is possible to enter the next station, and the non conformity is still treated as a newspaper waste.

8，最终完成后的产品还需要键鼠检测仪的最终检测。

8, the final product also needs the final test of the mouse detector.