随着时代的进步,患者对自我保護意识的提升, 伴随着对医生的不信任,医患纠纷也不断增加,例如,材料的真实性(作假现象)，相信医生都会很清楚,其实医患纠纷最终责任人是医生,当然,如果是材料上的錯誤（如作假）,雖然牙模廠是負100%的責任,但同时医生的信誉也会受损,所以找到一个值得信任的牙模厂非常重要。

With the progress of the times, to enhance the self-protection consciousness of patients, accompanied by distrust of doctors, medical disputes are increasing, for example, the authenticity of the material (false), believe that the doctor will be very clear, in fact, the doctor-patient dispute is ultimately responsible doctor, of course, if material errors (such as although the factory is set), false negative 100% of the responsibility, but at the same time the doctor's reputation will be damaged, so to find a trustworthy factory model is very important.

定远陶齿公司运用现代化高科技XRF光谱合金分析仪，昂贵的设备能完成从主观上对金属材质成份的肉眼判断轉為科学客观标准分析，完全保证戴到患者口腔中的义齿内冠金属材料的科学性、合理性、真实性,以此确保医生及患者的权益

The use of modern high-tech companies in Dingyuan ceramic teeth XRF spectra of the alloy analyzer, expensive equipment can be completed from the subjective judgment on the metal material component into the scientific and objective analysis standard, fully guarantee the wear to the mouth of a patient in the denture is scientific and reasonable, the authenticity of the crown of metal materials, in order to ensure the interests of doctors and patients

下面我们通过金属检测仪的工作流程为大家展示金属的流程管控：

Under the work flow of metal detector, we show the process control of metal.

1， 供应商提供金属后需做进货检验，抽检不同批次的原材料检验，合格后才会进入仓库。

1, the supplier needs to do the inspection of the goods after the supply of metal. The inspection of the raw materials for different batches will be checked, and the warehouse will be entered after the supplier is qualified.

2， 领用金属后会订单编号逐一核对金属品名，并使用条形码管理每个批次的金属使用在不同的订单中

2, the metal name is checked by the order number one by one, and the bar code is used to manage each batch of metal in different orders.

3， 铸造完成后要再一次进行金属成分检测,以防成分不准,若此次检测过程中发现有成分不准或金属发错现象要立即返工.

3, after the completion of the casting, we must check the metal composition again, so as to prevent the components from being inaccurate. If the components are not allowed or the metal is wrong, we need to rework immediately.

4，铸造后清理出来的铸头（俗称钢头）统一收集，并做好标识进行报废处理。

4, the cast head (commonly known as steel head) after casting (commonly known as steel head) is collected, and the identification is done for scrap treatment.

5，受污染含少量镍的钴铬金属(必须报废,不允许流入生产线)。铸造完成的半成品金属内冠，经过金属检测仪检测出有污染情况的，也要进行隔离分装，标识报废处理

5, cobalt and chromium metal contaminated with a small amount of nickel (must be scrapped and not allowed to flow into the production line). The semi finished metal inner crown of the foundry has been detected by the metal detector, and the separation and distribution should be carried out, and the discarded treatment should be marked.