1， 供应商提供金属后需做进货检验，抽检不同批次的原材料检验，合格后才会进入仓库。

1, the supplier to provide metal after the need for stock inspection, sampling of different batches of raw materials inspection, qualified, will enter the warehouse.

2， 领用金属后会订单编号逐一核对金属品名，并使用条形码管理每个批次的金属使用在不同的订单中

2, after using metal, will order number one by one to check the metal name, and use bar code management each batch of metal used in different orders

3， 铸造完成后要再一次进行金属成分检测,以防成分不准,若此次检测过程中发现有成分不准或金属发错现象要立即返工.

3, after the completion of the casting once again to carry out metal composition detection, in order to prevent the composition is not allowed, if the detection process found that the ingredients are not allowed or metal wrong phenomenon, immediately rework

4，铸造后清理出来的铸头（俗称钢头）统一收集，并做好标识进行报废处理。

4, after casting clean out the casting head (commonly known as steel head) unified collection, and do the logo for scrap treatment.

5，受污染含少量镍的钴铬金属(必须报废,不允许流入生产线)。铸造完成的半成品金属内冠，经过金属检测仪检测出有污染情况的，也要进行隔离分装，标识报废处理

5, contaminated cobalt and chromium containing a small amount of nickel (must be scrapped, not allowed to flow into the production line). The semi finished metal inner crown made by the casting can be detected by metal detector, and should be segregated and packed

6，通过成份检测后还需要使用放大镜,放大倍数进行筑巢、缩孔的检验

6, it is necessary to use magnifying glasses to test the nesting and shrinkage after magnifying the composition

7,   检查金属成份合格的半成品还需要高精密检测仪(显微镜)检查铸造的边缘适合性，边缘完成线的完整性。符合要求的才能进入下一站作业，不符合的仍作为报废品处理。

7, the inspection of qualified metal parts semi-finished products also need high-precision detector (microscope) to check the marginal suitability of casting, the integrity of the edge completion line. Only in accordance with the requirements can enter the next station operation, the inconsistent is still reported waste disposal.

8，最终完成后的产品还需要键鼠检测仪的最终检测。

8, the final completion of the product also requires the ultimate detection of the bond mouse detector.